Foundation Crack and Water Seepage in Stockton, CA

Monday, October 7th, 2024 by Mike Gray

Challenge

The Challenge:

A homeowner in Stockton, CA, experienced significant water seeping up through a crack in their slab foundation. After investigating the issue, it became clear that the underlying cause was foundation settlement. The settlement had led to the cracking of the slab, creating a pathway for water to infiltrate the interior of the home, causing distress and potential damage.

Inspection and Diagnosis:

Foundation Repair of CA conducted a thorough assessment of the foundation, confirming that the settlement of the foundation had caused the cracking. Without stabilization, the foundation would likely continue to shift, further exacerbating the water intrusion problem and possibly causing structural damage.

Solution

Solution:

To address the foundation settlement and the slab crack, Foundation Repair of CA provided a comprehensive solution, which included the following:

Installation of Push Piers (Galvanized, Low-Profile Brackets):

Scope of Work: The team excavated around the foundation and installed Push Piers to support and stabilize the affected sections of the home. The galvanized, low-profile brackets were used to securely lift and reinforce the structure. This method involved soil excavation up to 3 feet deep and utilized piers with an 80-foot depth capacity to ensure deep, stable support. Push Piers are designed to prevent further settlement and restore the integrity of the foundation.

Interior Slab Removal and Replacement:

Scope of Work: The team removed and replaced 252 square feet of the damaged slab, installing a new 5-inch-thick concrete slab with #4 rebar and a 6-inch base rock for enhanced structural support. The slab was finished with a smooth, natural color that matched the existing floor. This process ensures that the new slab is strong, resistant to future damage, and fully sealed against moisture intrusion.

Concrete Saw Cut (Single Line):

Scope of Work: To create clean and precise cuts in the slab for repair and replacement, Foundation Repair of CA performed single-line saw cuts according to the job drawings. This allowed the team to efficiently remove and replace sections of the damaged slab without affecting the surrounding areas.

X-Ray Slab Detection:

Scope of Work: Before cutting or drilling into the concrete slab, Foundation Repair of CA utilized an X-ray machine to detect rebar and post-tension cables within the slab. This precaution helped minimize the risk of damaging structural elements and ensured the crew avoided potential hazards.

Outcome:

The project successfully stabilized the foundation and addressed the underlying causes of the water seepage. By installing Push Piers and replacing the damaged slab, the homeowner gained peace of mind that their foundation was secure and water intrusion would no longer be an issue.

Conclusion:

This project highlights Foundation Repair of CA’s expertise in diagnosing and resolving complex foundation issues. The comprehensive approach, including the use of advanced tools like X-ray slab detection and the implementation of galvanized Push Piers, ensured a long-lasting solution for the homeowner. The successful completion of this project underscores their commitment to safeguarding homes and ensuring customer satisfaction.